Cracked or heaved concrete walkways are a tripping hazard and an eyesore. We connect homeowners and commercial properties throughout Murphy and Collin County with contractors who install new walkways, replace sections lifted by tree roots, and repair damaged concrete.

Murphy sits in eastern Collin County between Plano and Sachse, a small city that has been almost entirely built out within the past three decades as DFW's northeastern suburban growth filled in what was, until relatively recently, farmland — nearly all of Murphy's housing stock dates from the 1990s through today. That recent, compressed development timeline means the city has little of the older-housing-stock variety seen in longer-established North Texas cities like Denton or Sherman; the foundation-repair picture here is almost entirely about how well individual subdivisions were engineered and graded during that relatively short building boom rather than about original construction reaching old age. Collin County's blackland prairie clay is among the most expansive in North Texas, and Murphy's small size and late, rapid development mean it shares the same fundamental soil challenge as its larger, more well-known neighbors Plano and Wylie, just compressed into a much shorter and more recent construction window.

Replacing Sections vs. Full Replacement

Concrete walkways can often be repaired section by section rather than replaced in full. A provider can assess the scope of the damage and recommend the most cost-effective approach. If a single section has heaved or cracked while the rest of the walk is sound, replacing that section alone is the right call. If the damage is widespread or the base has failed throughout, full replacement is usually more economical. A walkway is also one of the few concrete surfaces where a mismatched repair is highly visible, since new and old concrete never color-match perfectly — that's worth weighing against the cost savings of a partial fix.

  • Single heaved or cracked section, rest of the walk sound — section replacement is typically the right call.
  • Widespread cracking or multiple failed sections — usually more economical to replace the full run at once.
  • Cosmetic color mismatch between old and new sections — a real consideration for a highly visible surface, worth discussing before choosing partial repair.
  • Trip-hazard sections (raised more than about 1/4 inch at a joint) — worth prioritizing regardless of overall walkway condition, since these create real liability.

Tree Root Damage

Tree roots lifting concrete sections is one of the most common walkway problems in established Collin County neighborhoods. The contractor will remove the damaged section, cut or redirect the offending roots where possible, add base material, and pour the replacement. If the tree is close enough that roots will continue to be a problem, we can discuss root barrier options that may slow the recurrence. Cutting a root outright is sometimes the simplest fix, but it's not always the right one — a root large enough to lift a walkway section can also be structurally important to the tree, so a contractor experienced with this tradeoff will tell you honestly when redirecting or working around a root is the better call versus cutting it.

  • Small feeder roots near the surface — usually safe to cut without harming the tree, and the most common cause of minor heaving.
  • Larger structural roots — cutting these can destabilize the tree; redirecting the walkway or using a root barrier is often the better approach.
  • Root barriers — physical panels installed to redirect future root growth away from the new concrete, worth discussing for trees that are clearly still growing.
  • When a tree is simply too close — occasionally the more honest answer is that no walkway repair will be permanent until the underlying spacing issue is addressed.

Have Questions?

Not sure what your project needs? Describe what you're looking for and we'll walk you through the options and give you a clear quote.

Call (832) 981-3655

This content is reviewed by the Texas Concrete Contractor editorial team and informed by licensed-contractor sourcing, manufacturer documentation, and established industry standards for Concrete. Read our editorial standards.