Concrete Patios in Longview, TX

A concrete patio is a durable, low-maintenance outdoor living surface when it's poured correctly. We connect homeowners throughout Longview and Gregg County with contractors who install concrete patios in plain, broom-finished, exposed aggregate, and stamped finishes — with proper slope for drainage, correct control joints, and the reinforcement appropriate for the application.

Longview grew up as a railroad town where the Texas and Pacific crossed the International-Great Northern in the 1870s, and the East Texas Oil Field boom of the 1930s — one of the largest oil discoveries in U.S. history — left the city with a wave of prosperous 1930s-40s housing still standing in the older neighborhoods near downtown. Newer subdivisions have filled in south toward Loop 281 and along the Highway 259 corridor as the city's healthcare and logistics economy (Eastman Chemical operates a major plant nearby) has grown. Gregg County sits deep in the East Texas pine belt, with heavy annual rainfall, dense tree cover, and the same iron-rich red clay found throughout the region — a soil type that holds moisture longer than the caliche or sandy soils found farther west in Texas, putting sustained pressure on concrete driveways and slabs, particularly where mature pines have grown close to a home's foundation over the decades.

Finish Options for Concrete Patios

Broom finish is the standard residential exterior texture — slightly rough for traction, clean looking, and durable. Exposed aggregate removes the surface paste to reveal the stone in the mix — a more textured look that hides minor surface wear. Stamped concrete uses patterned mats pressed into the wet surface to create the look of brick, slate, stone, or tile. All three options are available and we can show you samples before you commit to a finish. Color and texture aren't purely cosmetic decisions in Texas — a darker finish absorbs more heat and can be genuinely uncomfortable barefoot in direct summer sun, while a lighter broom finish stays noticeably cooler.

• Broom finish — the standard, most affordable, lowest-maintenance option; slightly textured for traction and stays cooler underfoot than darker finishes.
• Exposed aggregate — reveals the stone in the mix for a textured, natural look that also hides minor surface wear well over time.
• Stamped concrete — patterned to resemble brick, slate, or stone at a lower cost than the real material, with periodic resealing required.
• Acid-stained or dyed finish — a variegated color effect applied to the cured surface, often paired with a broom or light stamped texture.

Drainage and Control Joints

A patio that doesn't drain away from the house is a foundation liability. Contractors we connect you with slope patios a minimum of 1/8 inch per foot away from the structure to ensure water flows away. Control joints are placed to manage where cracking occurs — in a patio this size, joints every 8-10 feet in each direction is standard. Patios without control joints tend to develop random cracking within a few years. Drainage matters even more directly beside a house than out in a driveway, since a patio sloped even slightly toward the foundation instead of away from it can contribute to the same soil-moisture problems that drive foundation settlement in expansive clay.

• Slope away from the house — a minimum of 1/8 inch per foot, checked during layout before the pour, not assumed.
• Control joints at proper spacing — typically every 8-10 feet, placed to guide where the concrete cracks rather than leaving it to chance.
• Transition points — where a patio meets a step, a foundation, or an existing slab are common weak points if not detailed correctly.
• Downspout and gutter coordination — a patio poured without accounting for where roof runoff lands nearby can undermine even a well-sloped surface.

This content is reviewed by the Texas Concrete Contractor editorial team and informed by licensed-contractor sourcing, manufacturer documentation, and established industry standards for Concrete. Read our editorial standards.